Use the in. distribution tubing to transport water directly to your plants. Works as a supply line to an emitter or a feeder line branching off larger tubing or pipe. Another use is to punch emitters directly into the side of the tubing to deliver water along the way. The in. tubing features an outside diameter (OD) of 0.620 in. & internal diameter (ID) of 0.520 in. While other manufacturers use blended recycled material to construct their entire tubing, Raindrip poly tubing has a unique layering method using 100% virgin content for the outer and inner layers for a more durable product, and middle layer of recycled content.
- Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
- As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated
- To use as a main supply line, attach to a point-of-connection device connected to the water source; to use as a feeder line, connect to the main line with a fitting; to use as a dripper line, attach emitters directly into the line
- Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting
- Tubing outside diameter (OD) is 0.620 in., internal diameter (ID) is 0.520 in.; connects to point-of-connection device using appropriate fitting; emitters and feeder lines can be punched directly into the line or attached to the end
Comes with one 100 ft. coil of 1/2 in. poly supply tubing
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling