Reduce the amount of pressure from the water source and filter out particulates that can clog and damage emitters with the all-in-one pressure-regulating Y filter. This device is preset at 30 PSI and has a flow range from 0.2 to 5 GPM. The 200-mesh filter blocks particles and is removable for cleaning. The 3/4 in. MPT X 3/4 in. MPT device connects to pipe commonly used in underground valve systems. The pressure-regulating Y filter is made of ABS; filter screen is made of stainless steel.
Drip irrigation waters plants efficiently, reducing water usage by up to 70% compared to conventional sprinkler irrigation. Drip irrigation systems are easy to install, operate, and maintain, and can easily be automated. With proper installation of a drip system, water is delivered precisely to where plants need it most, and plants get the hydration they need for optimal growth and overall health.
- Connects to a water supply line with a 3/4 in. FPT connection point
- Drip irrigation systems work with low water pressure, and the pressure-regulating filter lowers the water pressure from a water source while preventing particulates from clogging and potentially damaging emitters
Attach to 3/4 in. FPT; use Teflon tape to make a watertight seal and tighten by hand; flow rate for line should not exceed 5 GPM [emitter flow rate (GPH) multiplied by # of emitters on line divided by 60 should be less than 5 GPM]
- Periodically check for leaks or damage and replace or repair as needed; filter can be flushed out by removing the flush cap and running water through or screen removed from housing to clean
- Attach the pressure-regulating filter to pipe with a 3/4 in. FPT connection point
Comes with one pressure-regulating Y filter
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling