Drip irrigation systems are designed to work with low water pressure. When your water source emits high water pressure, it will be too much pressure for your system to handle. The solution? The pressure regulator does the trickit lowers the water pressure and alleviates stress on your drip system. No more flying fittings or popping off emitters! The in. FPT X in. MPT pressure regulator comes preset at 30 PSI. Connects to in. MPT pipe on one side (such as an existing underground irrigation system), and in. FPT pipe on the other, or connects to tubing with a in. FPT adapter (sold separately). The pressure regulator is made of high-impact acrylonitrile butadiene styrene (ABS) treated with UV inhibitors.
- Connect to an existing underground irrigation system with a in. MPT pipe or fitting, or other IPS
- Drip irrigation systems work with low water pressure, and the pressure regulator lowers the water pressure from a water source for optimal drip system performance
- Attach the pressure regulator to an existing underground irrigation system with a in. MPT connection point
- Periodically check for damage and replace as needed
- Attach to an existing underground irrigation system with a in. MPT pipe or fitting
Comes with one in. FPT X in. MPT Pressure Regulator
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
