How do I program the timer?
$ADD TO CART
The day and time are not set on this timer. The timer must be set at the time of day that the watering is to begin. If you want the watering to begin at 7:00 am, then the timer must be programmed at 7:00 am. Before you begin programming, set all dials to either the RESET or OFF position. To set the start time, turn the FREQUENCY dial to the desired setting at the time of day watering is to begin. The frequency is how often you want the water to come on. Setting the dial to “1” means that the water will come on every hour (24 starts per day). Setting the dial to “48” means that the water will come on every 48 hours (every other day). After setting the FREQUENCY dial, turn the RUN TIME dial to the desired setting. Run time is how long the water will run for, in minutes. Note: The Frequency must be a longer duration than the run time.
Shipping Weight: not specified.
Warranty: Raindrip stands by their product and gives a 1 year 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free. Just pay shipping and handling.