Water gardens, flower beds, ground cover, and hillsides with low volume overhead irrigation using the Micro Spray Jet. Place on a rigid riser with stake (not included) and the fan spray emits water in a quarter-circle pattern at up to 12.9 GPH with a radius of up to 9.0 ft. (at 15-50 PSI). Screw jet onto riser and connect 1/4 in. supply tubing to the inlet barb on stake. The Micro Spray Jet works at low pressures, so a pressure regulator is recommended to reduce water pressure and prevent the jets from popping off. Made of polyethylene treated with UV inhibitors.
- Ideal for watering groundcover, flower beds, planting beds, vegetable gardens, and plants which prefer some humidity
- As part of a complete drip irrigation system, the emitter delivers low volume overhead irrigation; with a non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
- Micro Spray Jet comes with a 10-32 threaded inlet which connects to rigid riser
- Periodically check for leaks or damage and replace as needed; recommended operating pressure for most emitters is between 15 to 50 PSI
- Built-in 10-32 threaded inlet connects emitter to rigid riser
Comes with ten Micro Spray Jets
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
