0.710 in. Supply Tubing, Black Polyethylene, 200 ft.

0.710 in. Supply Tubing, Black Polyethylene, 200 ft.

Use durable, weather-resistant 0.710 in. supply tubing as a main line to deliver water to a drip watering device or a feeder line, or use a series of emitters punched directly into the side of the tubing to distribute water along the line. The 0.710 in. supply tubing has an outside diameter (OD) of 0.710 in., internal diameter (ID) of 0.620 in. While other manufacturers use blended recycled material for their entire tubing, Raindrip poly tubing is constructed with an innovative layering method, using 100% virgin content for both inner and outer layers for a more durable product, and a middle layer of recycled content.

Transport water in your drip irrigation system

Use as a supply line connected to emitters and/or feeder lines

Deliver water along the line with punched-in emitters

Model::

062020P

Use as a main supply line connected to a low-flow, drip-watering device or deliver water along the line using emitters punched into the side of the tubing

Works in a variety of areas, from small to large, flat or sloped, to water trees, shrubs, flower beds, groundcover, vegetable gardens, plants in pots, planter boxes, and hanging baskets
As part of a complete drip irrigation system, the supply tubing transports water to the area to be irrigated

Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting

To use as a main supply line, attach to a point-of-connection device connected to the water source; to use as a dripper line, attach emitters directly into the line
Periodically check for leaks or damage; once or twice a year, remove end closures and flush each circuit until the water runs clear; in cold climate areas, winterize by completely draining the system to prevent lines from damage or splitting
Tubing outside diameter (OD) is 0.710 in., internal diameter (ID) is 0.620 in.; connects to point-of-connection device using appropriate fitting; emitters and feeder lines can be punched directly into the line or attached to the end

Comes with one 200 ft. coil of 0.710 in. poly supply tubing

Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling

Kits

Timers

Connect & Control

Dripline & Tubing

Fittings & Adapters

Bubblers, Drippers & Micro Sprinklers

Tools, Stakes & Accessories

0.710 in. Supply Tubing, Black Polyethylene, 200 ft.

Company Info

Resources

Connect with Raindrip