Add a row or lateral line to your drip irrigation system with the 0.710 in. Compression Tee. Use the T fitting to join three sections of 0.710 in. supply tubing or dripline together or add an intersection to your line. Tubing is inserted inside the compression ring, where an internal barb compresses it to create a watertight connection. If its difficult to connect tubing, try softening the material by soaking the tube ends in hot water or leaving out in the sun. This compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.
- Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system
- As part of a complete drip irrigation system, the 0.710 in. tee connects 0.710 in. supply tubing or dripline together, or connects 0.710 in. tubing to other drip irrigation parts to transport water to the area to be irrigated
- Rock the end of tubing back and forth while pushing it into the compression fitting, where an internal barb will compress the tube to hold it in place; for rigid tubing, consider soaking the tube end in hot water or leaving out in the sun
- Periodically check for leaks or damage and replace as needed
- Fits 0.710 in. tubing and dripline with outside diameter of 0.710 in.
Comes with one 0.710 in. Compression Tee
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
