Add a T intersection to create a lateral line or branch in your drip system with the 1/2 in. Compression Tee. The fitting joins three sections of 1/2 in. supply tubing or dripline. To install, insert tubing inside the compression ring, where an internal barb compresses the tubing for a watertight connection. Having trouble with the tubing? Try rocking it back and forth while applying pressure, or soften the tube with a hot water soak or leaving it out in the sun. This compression fitting is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.
- Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system
- As part of a complete drip irrigation system, the 1/2 in. tee connects 1/2 in. supply tubing or dripline together, or connects 1/2 in. tubing to other drip irrigation parts to transport water to the area to be irrigated
- Rock the end of tubing back and forth while pushing it into the compression fitting, where an internal barb will compress the tube to hold it in place; for rigid tubing, consider soaking the tube end in hot water or leaving out in the sun
- Periodically check for leaks or damage and replace as needed
- Fits 1/2 in. tubing and dripline with outside diameter of 0.620 in.
Comes with two 1/2 in. Compression Tee
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
