Join 0.710 in. distribution tubing or dripline to a mainline pipe with the 0.710 in. X 0.710 in. X 3/4 in. FHT Compression Swivel Tee. The compression fitting has two 0.710 in. compression outlets and one 3/4 in. female hose thread swivel inlet. Screw swivel hose thread onto a standard 3/4 in. MHT connection point; fit 0.710 in. supply tubing or dripline into the compression rings, where an internal barb compresses the tubing for a watertight fit. Filter washer inside screens out particles. The compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.
- Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system
- As part of a complete drip irrigation system, the 0.710 in. tee connects to a water source and adds two branches of 0.710 in. distribution tubing or dripline to transport water to the area to be irrigated
Periodically check for leaks or damage and replace as needed
- Thread the 3/4 in. FHT connection point onto the 3/4 in. MHT pipe on one end; on the other end, insert two sections of tubing of the compression fitting, where an internal barb will compress the tube to hold it in place
- Periodically check for leaks or damage and replace as needed
- 3/4 in. FHT swivel inlet connects to 3/4 in. MHT connection point on one end; 0.710 in. compression outlets connect to 0.710 in. tubing and dripline with outside diameter of 0.710 in. on opposite side
Comes with one 0.710 in. X 0.710 in. X 3/4 in. FHT Compression Swivel Tee
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
