Attach 1/2 in. distribution tubing or dripline to a mainline pipe with the 1/2 in. X 1/2 in. X 3/4 in. FPT Compression Swivel Tee. The compression fitting has two 1/2 in. compression outlets and one 3/4 in. female pipe thread swivel inlet. Screw swivel hose thread onto a standard 3/4 in. MPT connection point; fit 1/2 in. supply tubing or dripline into the compression rings, where an internal barb compresses the tubing for a watertight fit. Filter washer inside screens out particles. The compression swivel adapter is made of acrylonitrile butadiene styrene (ABS) treated with UV inhibitors to prevent cracking.
- Works in a variety of areas, from small to large, flat or sloped, to join distribution tubing in your drip irrigation system
- As part of a complete drip irrigation system, the 1/2 in. tee connects to a water source and adds two branches of 1/2 in. distribution tubing or dripline to transport water to the area to be irrigated
Periodically check for leaks or damage and replace as needed
- Thread the 3/4 in. FPT connection point onto the 3/4 in. MPT pipe on one end; on the other end, insert two sections of tubing of the compression fitting, where an internal barb will compress the tube to hold it in place
- Periodically check for leaks or damage and replace as needed
- 3/4 in. FPT swivel inlet connects to 3/4 in. MPT connection point on one end; 1/2 in. compression outlets connect to 1/2 in. tubing and dripline with outside diameter of 0.620 in. on opposite side
Comes with one 1/2 in. X 1/2 in. X 3/4 in. FPT Compression Swivel Tee
Raindrip stands by their product and gives a 1-year, 100% satisfaction guarantee. If your product breaks, Raindrip will send you a new one for free, just pay shipping and handling
