Take the guesswork out of setting up a drip system with the Adjustable Flow Micro Sprinkler Assembly. The micro sprinkler, adjustable riser, stake, and inlet come preassembled and ready to install in minutes. Patented Clamp N Pierce inlet pierces any standard supply tubing and attaches inlet at once. Fan spray micro sprayer emits water in a quarter-circle pattern at up to 24 GPH and radius of up to 13 ft. (at 15-50 PSI). Increase or decrease water flow with a twist of the dial. Micro sprinkler, riser, and tubing made of polyethylene; stake and connector made of ABS; all materials treated with UV inhibitors.
- Ideal for watering groundcover, decorative grasses, flower and vegetable gardens, as well as trees and shrubs
- As part of a complete drip irrigation system, the emitter delivers water gradually; with this non-pressure compensating emitter, expect varying water flow based on length of tubing or elevation, with higher flow closer to the water source
- Adjustable Flow Micro Sprinkler Assembly comes preassembled so its ready to installinsert the stake in the ground, elevate or lower riser to preferred height, and connect the attached 1/4 in. tubing to larger size supply tubing with the Clamp N Pierce Con
- Periodically check for leaks or damage and replace as needed; recommended operating pressure for most emitters is between 15 to 50 PSI
- Clamp N Pierce Connector pierces into 1/2 in., 5/8 in., and 0.710 in. supply tubing and connects 1/4 in. tubing inlet
Comes with one Adjustable Flow Bubbler Assembly which includes a bubbler, riser, 13 in. stake, and 1/4 in. Clamp N Pierce inlet
1 year product warranty
